We’ve been busy this winter. Lots of new products have been added to the site. We will list them below. We have combed through the site and found lots of items to put on sale. And we have group pallets heading to Seattle and Alaska at end of February (and would like to gauge interest in sending some to Calgary and Quebec in April). Read on….
New items recently added:
AND on sale this month we have parts that run the whole gamut:
And….last but not least, we had announced at beginning of December that in conjunction with Peace Vans in Seattle and with Arctic Imports in Anchorage we were accepting orders to be combined on pallets to share in reduced shipping. Want a wheel package, steel bumpers, coolant pipes? Well if you have been scared off by high shipping costs for heavy or bulky items, then this is your time to act. Shipping is often 1/3 normal when sent by pallet with other’s orders. These two have already gathered enough steam that we are confirming they will be happening and shipping at end of February. (Items need to be ones that we stock and not items listed as drop ship items).
But we also want to start sowing the seeds for potential shipments to Calgary and to Montreal area. It has always been a struggle to affordably ship wheel packages and other large items to Canada but once we get a minimum of four Vanagon owners in one area, then the shared shipping expense becomes acceptable. It will eventually thaw out up there. Start planning now so you have your parts during the Spring and you will be ready for Summer travel.
As always, the staff at Van-Café thanks you for your continued support.
ONE PALLET TO SEATTLE AND ONE TO ALASKA - DEFINITELY HAPPENING......
Hmm - hard to find an image to match up with this segment that captures both Seattle and Alaska, but while looking I came across this vintage Golden Nugget ......
ALASKA - We will be having a pallet of parts heading up to Anchorage Alaska before end of February 2017. This gives fair amount of lead time so if you're close to Anchorage (which means within 500 miles to an Alaskan) then here is your chance to get bulky items shipped at a big discount. Arctic Imports has offered to jump in and help with logistics. Please make contact as soon as you can. If you are from Fairbanks and willing to shuttle parts for others up there please make contact as you will get extra discount for your assistance. Make good use of cold winter - turn up the heater in the garage and get working on preparing the Vanagon for Spring travel !
SEATTLE - We are excited to partner again with our friends in Seattle, Peace
Vans, to help defray shipping costs. Order before end of February,
and we'll pallet up everything and split the shipping costs with Peace
Vans as a thank you. Peace Vans will coordinate with you on a pick up date at their shop in Seattle. Grab some heavy parts where the shipping cost has been holding you back.
Space is always limited here (yeah, have you heard about rents in the Bay Area !). We love Nokian tires, but as time passes and certain models get phased out or updated to new versions, we get caught with some stragglers that simply take up space. As we have not acted on these quickly, some have older date codes (production dates) although they are stored in warehouse with no sun exposure so we are not concerned about integrity but it still needs to be acknowledged and reflected in the price. These tires are not listed on the site so if any of these interest you, please email us to work out the logistics. Get yourself a full set where available (and pair with some of our wheels) or grab a spare if you already have a given model. Here are the odd balls we are trying to move along with prices:3 x 205/65/15 Hakka C $75 each ($124 reg)
2 x 205/75/15 Vatiiva $50 each ($109 reg)
2 x 195/65/16 Hakka C $65 each ($154 reg)
1 x 215/65/16 WRC $90 ($178 reg)
4 x 195/75/16 Hakka C $85 each ($154 reg)
4 x 225/60/16 Entyre $65 each ($100 reg) (not the 2.0 - this is the previous version)
4 x 205/65/16 CR3 $90 each ($129 reg) Simply overstocked on this one - good value
Although the vast majority of our parts are supplied to the DIY crowd, we realize that not everyone has the time, tools, or desire to do their stint in the salt mines, slogging through tedious mechanical endeavors. As such, for those who would like some assistance with their repairs and upgrades to improve reliability and comfort, the following is a small smattering of jobs that our shop performs along with corresponding labor charges. (Again - labor charges only)
* Fuel Tank Reseal $200
* Brake Jobs $200 / axle
* Full Tune-Up and Inspection $200
* Windshield Install $100
* Clutch Jobs 2WD/4WD $400/$600
* Propex Heater Install $600
* 3 Window Poptop Canvas Install $500
* Spring/Shock Upgrades 2WD/4WD $250/$350
* Stainless Steel Pipe Upgrade 2WD/4WD $350/$300
For our out of town customers, we take seriously the need to perform our tasks in a timely manner. We are thankful that we are in a town with a variety of attractions and distractions competing for your attention, but we understand your need to get back in your van promptly and back on the road on schedule and will accommodate as best we can. Similarly, we are a small shop with limits to hours in the day and room for parking, so we ask that you do schedule an appointment with some advance notice as drop-in appointments cannot always be indulged.
For a change of pace .... You will probably be noticing that we've switched to a different cookie distributor for our shipped orders. This was not an easy decision. In the news we hear on a regular basis about how overweight people are getting and so we had a moment of concern for our customers. Were/are we contributing to their ill health? Tipping the scales for folks who are hyper-glycemic over to diabetes? Then we thought, nah. They're grownups, they can decide if they want a cookie or not.
But then there's all the genetically modified food debates and the realization that maybe we don't know exactly what all IS in our food? But there is this spiffy new application for your iphone that allows you to scan an item at the grocery store and have it tell you instantly if that company uses or is owned by a company that is a GMO baddie? Ruh roh, the cookies we were shipping appeared on that list!!
So then we thought 'We'll kill two birds with one stone! We'll buy/support a local business here in Santa Cruz, especially one that does not use GMO ingredients. Brilliant!" Many extra calories were gained doing "research", political debates rose and fell, tearful goodbyes were said to the last of the previous cookies, and lo the decision to go with Pacific Cookie Company cookies was made.
Actually, the whole debate started when the local Costco stopped carrying the first and the decision to go with the second seemed like a no brainer. We hope you enjoy the new treat. We will miss the curious stares at the Costco when we roll the dolly full of Famous Amos cookies through the store.
The added bonus is the variety of flavors. Now after four months we have sampled Chocolate Chip, Dr. Midnight, Peanut Butter, and Oatmeal Raisin and we are going with Mint Chocolate this month. Looks like you need to spread out your purchases and get an order once a month :)
Two years ago, we commented on two promising events developing that were supportive of the Vanagon community - the burgeoning presence of Classic VW (Germany) and the entrepreneurial efforts of businesses and individuals to fill in the gaps. During this past two years both of these efforts have flourished. In our opinion, Classic VW has done an excellent job of consolidating original equipment manufacturer parts, new manufacturer to original spec parts, and old remaining stock of new parts to provide the best quality parts available for many essential items that we worried were disappearing for good. We now purchase over 250 part numbers from them and find ourselves on a continuous order cycle, whereby a large new order is placed each time the previous order is received and stocked. And based on the visits we receive a few times a year from Classic representatives (likely additionally influenced by the attraction of our weather), we are lead to believe that the feeling is mutual as they profess their appreciation for the volume of business we are conducting with them. Separately, the efforts of both businesses and individuals to fill the gaps continue. Not long after a part disappears, it seems someone in the Vanagon community steps up with a plan to produce that part or design and manufacture a suitable alternative, and this is separate from the development or adaptation of creature comfort products that work on the Vanagon to improve on the driving and/or camping experience. Following is a list of items that have returned to being available after varying lengths of being absent, along with some new products: *German Mud Flaps front and rear * Carrot Alloy Wheels 15" and 16" - Wheels and Packages * Trailmaster Complete Suspension Packages for Syncro Tin Top or Westy * Iron Man Products - Awnings - Fridges * Automatic Transmission Coolers * Emergency Road Kit * All Complete Coolant Hose Kits - Yes, Syncro - 1.9 ltr - 2.1 ltr manual trans - 2.1 ltr auto trans (quite the juggle to keep all these hoses from various sources (US supply/German supply/silicone hoses) in stock to make these kits complete). And here follow a few other items that we have been out of for a while that will be returning in the near future: German 16" Steel Wheels due in January Pillar Trim (front rain gutter molding) due during December If interested, please feel free to email us if you would like to be contacted when they arrive.